| Brand |
Mushkin Enhanced |
| Series |
Source DCX |
| Model |
MKNSSDDC480GB |
| Type |
7mm Internal Solid State Drive (SSD) |
| Used For |
Consumer |
| UPC |
846651029607 |
Physical
|
| Form Factor |
2.5″ |
| Capacity |
480GB |
| Interface |
SATA 6GB/s |
| Controller |
Silicon Motion |
| Height |
7mm |
| Width |
68.95 |
| Depth |
100.45 |
| Weight |
50g |
Performance
|
| Max Sequential Read |
Up to 560MB/s |
| Max Sequential Write |
Up to 470MB/s |
| Seek Time |
<0.1ms |
| TBW |
225 |
| MTBF |
1,500,000 hours |
Features
|
| Features |
MEDS (Mushkin Enhanced Data-protection Suite) ensures valuable data is protected |
| – Built-in LDPC ECC provides the most-powerful error correction method in use today |
| – Internal flash RAID provides additional error correction capability |
| – Data shaping increases endurance |
| – StaticDataRefresh ensures data integrity |
| – Global wear-leveling evens program/erase counts across data blocks to extend lifespan |
| SLC caching accelerates burst performance |
| Device Sleep mode (DEVSLP) supported |
| Supports Security Erase |
| TRIM support (OS/driver support required) |
| High-reliability 3D TLC NAND flash |
| S.M.A.R.T. support |
| User-upgradeable firmware |
| Temperature sensor |
| RoHS, FCC, CE |
| Power Consumption (Idle): 0.08W |
| Power Consumption (Active): 3W |
| Max sequential speeds and IOPS measured using CrystalDiskMark 6.0.2 x64 |
Environmental
|
| Operating Temperature |
0°C-70°C |
| Storage Temperature |
-40°C-85°C |
| Max Shock Resistance |
1500G |
| Power Supply |
5V DC |
Warranty
|
|
5-year limited warranty or Listed TBW whichever comes first |
Reviews
There are no reviews yet.